Need concrete patios in Glassboro?
- Request an estimate in a few minutes
- Independent local providers
- Written quotes with clear scope
- No obligation
Request a patio estimate
A concrete patio is new flatwork: a level, durable slab for seating, grilling and everyday outdoor use. Reltar Concrete does not pour it. We connect homeowners in Glassboro and the Glassboro area with independent providers in our network who handle layout, base, forms, pour and finish.
This page covers what a patio job includes, what moves the price, and what to ask before you hire. Cold winters, frost and spring snowmelt put real stress on outdoor slabs in New Jersey, so base work and drainage matter as much as looks. Scope before price. Describe the job, request an estimate, and compare written quotes that cover the same work.
Scope before price. Decide where the slab goes, how big it is and how you will use it. Then every provider quotes the same job, and the numbers can be compared fairly.
This page covers new patios only. A patio is concrete flatwork: a flat slab poured on prepared ground.
Concrete is firm and level. It holds tables, grills and heavy planters without shifting. It can stay plain or take color and texture. With a solid base and well-placed joints, it handles cold winters well. Upkeep is light: sweep, rinse and reseal when needed.
Most quotes cover the steps below. Confirm each one appears in writing.
The provider marks the layout, removes sod and soil, and sets a compacted gravel base. In snowy regions, base depth matters. Wet soil moves with frost, and a thin base lets the slab move with it.
Wood forms set the shape and the slope. Wire mesh or rebar adds strength. Then the concrete is poured, leveled and finished by hand.
Control joints are shallow cuts that guide cracks into straight lines. Curing keeps moisture in the slab while it hardens. Rushed curing weakens the surface.
Measure for real use. A small bistro set fits in about 10 by 10 feet. A dining table, chairs and a grill often need 12 by 16 feet or more. Leave room to pull chairs back without hitting the edge.
Four inches is typical for foot traffic and furniture. A hot tub or heavy outdoor kitchen needs a thicker, reinforced pad. Say so at the start, because it changes the quote.
A broomed finish adds grip when wet, which suits outdoor use. A smooth trowel finish looks sleek but can be slick in rain or ice.
Color can be mixed into the batch. Exposed aggregate reveals small stones in the surface. Stamped concrete patios press patterns that mimic stone, brick or wood. They cost more and need sealing. Each option adds a separate line to the quote.
A patio should slope away from the house, typically about 1/8 to 1/4 inch per foot. Water that pools at the wall can seep toward the basement.
This matters most with older homes, where stone or block foundations are common. Snowmelt and coastal storm runoff make it worse. If you already see wall cracks or a damp basement, talk to foundation repair experts before any flatwork goes in against that wall. Ask the patio provider to state the planned slope in the quote.
Five things move the number most: total square footage, thickness, finish, site access and prep. Removing an old slab or regrading a sloped yard adds cost.
Prices vary by region and by job. Get it in writing, with each item listed, before anyone mixes a batch. Quote, then pour.
A good answer is specific. For example: "Four inches of concrete over compacted gravel, sloped a quarter inch per foot, joints every eight to ten feet." Vague replies like "we do it all the time" are a reason to ask again.
Follow the provider's advice on when to walk on the slab and when to place furniture. Seal when they recommend it. In the first winter, skip de-icing salts and use a plastic shovel. Sweep often and rinse spills.
Write down the size, the finish and any drainage worries. Then request an estimate, and Reltar Concrete will match you with a provider in our network.
The provider marks the footprint, removes sod and soil, and sets the grade before any base goes in.
A firm, well-drained base helps the slab resist frost movement and spring snowmelt.
Forms shape the edges, and mesh or rebar adds strength before the pour.
The surface is troweled or textured, then cut with joints and left to cure.
These are typical U.S. ranges, not quotes. Your price depends on size, finish, access and local labor. Ask each provider for a written, itemized quote so you can compare the same scope.
| Item | Typical range | Notes |
|---|---|---|
| Plain broom-finish patio | $6 – $12 per sq ft | Common baseline; varies by region |
| Stamped or textured finish | $12 – $22 per sq ft | Pattern, color and sealing add cost |
| Integral color add-on | $1 – $3 per sq ft | Mixed into the concrete |
| Extra base and grading | $1 – $4 per sq ft | Higher for sloped or soft sites |
| Old slab removal | $2 – $6 per sq ft | Depends on thickness and disposal |
| Sealer | $1 – $3 per sq ft | Often reapplied every few years |
Share the size, finish and any drainage concerns through the estimate form, with no obligation.
Reltar Concrete refers your request to an independent local provider in our network.
Check scope, base, slope, finish and exclusions before you agree to anything.
The provider you choose handles the pour, finish and cleanup on the agreed schedule.
Every item listed in the quote means fewer surprises once the work starts.
Properly based concrete handles furniture, grills and winter weather.
Plain, colored, aggregate or stamped finishes fit different budgets and home styles.
We refer you to local providers in our network, so you can compare quotes.
Typical U.S. prices run from about $6 to $12 per square foot for a plain slab, and more for stamped or colored finishes. Costs vary by job, so get a written quote.
Four inches is typical for foot traffic and patio furniture. Heavier loads, such as a hot tub, need a thicker, reinforced slab. Ask the provider to state thickness in writing.
It can if it slopes toward the house. A proper slope away from the wall helps. If you see wall cracks or dampness, have the foundation checked first.
Send your project details through the estimate form, or write to contact@reltar.property. A local provider in our network will follow up with questions and a written quote.
No obligation